INVERTED by ToB1

Forum for PC Mods, featuring some of our sponsored mods.
ToB1
Average
PostsCOLON 35
JoinedCOLON Wed Jun 02, 2010 10:43 pm

Re: INVERTED by ToB1

Postby ToB1 » Sun Sep 26, 2010 8:20 pm

I were going to order some 5mm thick red plexi for performance-pcs.com yesterday, but I discovered that the shipping would cost nearly twice as much as the products. I've been looking for plexi in other stores, but I can't find any other red plexi than 3mm thick, so I think I'll end up purchasing some 6mm thick clear plexi from the local Clas Ohlson :?

I've been a bit busy lately, but during the week after next week, I think I'll be mounting both of the side doors, and make holes for the LEDs on the motherboard tray, if everything goes according to plan. And if I get the plexi from Clas Ohlson, I might finish the feet too :)

I hope you are not disappointed that this project takes some time to finish, but I just want every thing to end up just as great as I'm imagine :D
INVERTED by ToB1

ToB1
Average
PostsCOLON 35
JoinedCOLON Wed Jun 02, 2010 10:43 pm

Re: INVERTED by ToB1

Postby ToB1 » Wed Sep 29, 2010 10:58 pm

I just ordered some fan/radiator grills, 5mm red plexi, dustfilters etc. from performance-pcs.com even thou the shipping costs a fortune :?

I also bought locks and hinges form Clas Ohlson, so when the package from peformance-pcs.com arrives, i'll be ready to do some mor work! :)
INVERTED by ToB1

ToB1
Average
PostsCOLON 35
JoinedCOLON Wed Jun 02, 2010 10:43 pm

Re: INVERTED by ToB1

Postby ToB1 » Thu Oct 14, 2010 10:45 pm

Sorry for taking so long, but here's a new update!

Testing the LEDs for the feet:
Image
Image

Mounting and testing of the LEDs on the motherboard tray. Unfortunately 2 of the diodes seems to me a bit defect, and on of them doesn't work at all :(
Image
Image
Image
Image
Image
Image
Image
Image
Image

Mouting hinges on the to sidedoors:
Image
Image
Image
Image
Image
Image
Image

Testing the holes i made for the locks:
Image
Image
Image
Image

Milled/Routered an edge so the motherboard tray will be mounted tighter:
Image
Image

76mm-hole for the rear 80mm fan:
Image

The content of the package from performance-pcs.com. Unfortunately I got a 3mm thick panel of acryl instead for 5mm thick as I ordered. Therefor I ended up buying 6mm thick clear plexi for Clas Ohlson.
Image
Image
Image
Image
Image
Image
Image
Image
Image

Hope you like the update, and I promise to post a new one soon!:)
INVERTED by ToB1

ToB1
Average
PostsCOLON 35
JoinedCOLON Wed Jun 02, 2010 10:43 pm

Re: INVERTED by ToB1

Postby ToB1 » Sun Oct 17, 2010 3:29 pm

Almost finished with the feet! :)
Image
Image
Image
Image
Image
Image
Image
Image
Image

Hole for the fans on the top of the case...
Image
Image
Image
Image

Last to holes for the locks:
Image
Image

What do you think about the feet?
INVERTED by ToB1

Deary65
Above Average
PostsCOLON 95
JoinedCOLON Tue May 25, 2010 7:03 pm
LocationCOLON SW England
CONTACTCOLON

Re: INVERTED by ToB1

Postby Deary65 » Sun Oct 17, 2010 5:04 pm

I think they're amazing. Did you get that idea yourself?
They seem a but of a hassle wiring though.
Looking great, as expected, so far!
Image

ToB1
Average
PostsCOLON 35
JoinedCOLON Wed Jun 02, 2010 10:43 pm

Re: INVERTED by ToB1

Postby ToB1 » Sun Oct 17, 2010 6:16 pm

Deary65 wroteColonI think they're amazing. Did you get that idea yourself?
They seem a but of a hassle wiring though.
Looking great, as expected, so far!


I've seen a lot of other projects online, and the feet are a combination of the things I've seen and my own imagination ;)

I'm glad you like them! :D
INVERTED by ToB1

Deary65
Above Average
PostsCOLON 95
JoinedCOLON Tue May 25, 2010 7:03 pm
LocationCOLON SW England
CONTACTCOLON

Re: INVERTED by ToB1

Postby Deary65 » Sun Oct 17, 2010 7:14 pm

If you find a way to mass produce them that that makes them compatible with many computers, it may be a neat modification people could do to their comps.
Image

ToB1
Average
PostsCOLON 35
JoinedCOLON Wed Jun 02, 2010 10:43 pm

Re: INVERTED by ToB1

Postby ToB1 » Wed Oct 20, 2010 12:58 pm

Deary65 wroteColonIf you find a way to mass produce them that that makes them compatible with many computers, it may be a neat modification people could do to their comps.


If I only had the time and the money needed to do that! :roll:
INVERTED by ToB1

ToB1
Average
PostsCOLON 35
JoinedCOLON Wed Jun 02, 2010 10:43 pm

Re: INVERTED by ToB1

Postby ToB1 » Fri Oct 29, 2010 9:59 pm

I've cut the motherboard tray, and made a piece of MDF to cover the gap between the motherboard tray ant the vertical separator.
Image
Image
Image
Image
Image
Image
Image
Image
INVERTED by ToB1

phenoptix
Competent
PostsCOLON 744
JoinedCOLON Sat Apr 17, 2010 11:25 am

Re: INVERTED by ToB1

Postby phenoptix » Mon Nov 08, 2010 10:42 am

Really chipping along now! Looking good


Return to

Who is online

Users browsing this forum: 1 and 0 guests