problems after r.o.l mod

Articles and posts on soft modding XBOX 360s, no chat on back ups and hacking!
chief10bellys
Harmless
PostsCOLON 2
JoinedCOLON Tue Apr 23, 2013 12:56 pm
LocationCOLON manchester england

problems after r.o.l mod

Postby chief10bellys » Tue Apr 23, 2013 1:07 pm

hi everyone,i recently did a r.o.l mod on an old controller,i swapped out default green leds with blue ones.everything went ok up to the point I tested the controller.when the rumble motors activate the r.o.l flickers and sometime fades in and out but only on battery power not when battery is charging off plug and play charger.i've been told that blue leds have a higher voltage and therefore need more power.is there a fix for this problem? thanks!!. :?:

phenoptix
Competent
PostsCOLON 745
JoinedCOLON Sat Apr 17, 2010 11:25 am

Re: problems after r.o.l mod

Postby phenoptix » Tue Apr 23, 2013 7:28 pm

Only thing to do is use AAs really. Charge packs are notorious for low voltage

chief10bellys
Harmless
PostsCOLON 2
JoinedCOLON Tue Apr 23, 2013 12:56 pm
LocationCOLON manchester england

Re: problems after r.o.l mod

Postby chief10bellys » Wed Apr 24, 2013 8:04 pm

ok will try that and see what happens,thanks for the reply and hope to post pics of some of my efforts.


Return to

Who is online

Users browsing this forum: 1 and 0 guests